How to put a ship in a bottle

[admin]

There are many methods for putting a ship in a bottle. The secret of getting the ship in a bottle is the masts. The simplest and most widespread way of inserting a ship into a bottle is turned back masts with a long thread running out of the bottle neck. The mast has a hinge at the bottom, which permits the mast to easily lie back. There are many different types of hinges which could be used. When you pull the thread that is running out of the bottle neck, the mast is raised to a vertical position. It is necessary afterwards to cut this thread.

[admin]

And This is instruction step - by - step for you
Things You'll Need:

• Thread
• Putty
• Scissors
• Building materials
• Bottle
• Paint or dye
• Hinges

1. Get a Ship in a Bottle
   
2. Step 1
   Get a bottle. The bottle's opening should be considerably smaller than the bulk of the bottle's diameter, but not any smaller than 1 or 2 inches.
3. Step 2
   Choose what type of ship you intend to build. Most artists of this kind like to create replicas of boats throughout history.
4. Step 3
   Measure the diameter of the bottle's opening. Keep this number handy. You will try to build the hull of the ship with a width and height less than that number.
5. Step 4
   Build the hull of the ship. Build everything except the mast, the spurs (support beams for sails) and the sails. Make sure this much of the boat can fit into the bottle.
6. Step 5
   Build the masts, spurs and sails separately. At the base of each of the masts, add a hinge. Each mast will need a hinge that can bend the sails at a near 90-degree angle.
7. Step 6
   Add the masts and sails to the rest of the ship. Make sure all the hinges are pointed so the open side of the hinges face the front of the boat.
8. Step 7
   Attach a line of sewing thread to each of the vertical, hinged masts. Connect the thread on the masts above the hinge. Make sure each thread is longer than the length of the bottle.
9. Step 8
   Mix paint or dye into putty to make the putty look blue, green or whatever your desired "sea" color should look like.
10. Step 9
    Get the putty inside the bottle. The putty will perform two functions: it will represent the sea and hold the ship in place.
11. Step 10
    Bend the masts forward and keep the thread pointed toward the rear of the ship. In this form, the ship should be able to fit into the bottle's opening.
12. Step 11
    Place the ship into the bottle and, using some homemade tools, place the ship firmly in the desired position on the putty. Make sure all the lines of thread are still outside the bottle.
13. Step 12
    Pull the lines of thread back gently, one at a time, to raise the masts and sails up to a perpendicular position. When the the optimum position is reached, cut away the threads

[admin]

More clips for you to easy, if you can do and after complete it, please let me know

YouTube Video

YouTube Video